Model | RG-AP740-I |
Target Deployments | For campuses, offices, hospitals, and hotspots of service providers |
Basic Specifications | |
Radio | Concurrent tri-radio dual-band |
Protocol | 802.11a/b/g/n/ac Wave 2 |
Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz 802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) |
Antenna | Built-in 'X-Sense 4' Smart Antenna 4×4 MU-MIMO |
Max Throughput | 1733Mbps/800Mbps/433Mbps per radio 2966Mbps per AP |
Spatial Streams | 4 |
Modulation | OFDM: BPSK@6/9Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps DSSS DBPSK@1Mbps DQPSK@2Mbps CCK@5.5/11Mbps MIMO-OFDM PSK, QPSK, 16QAM, 64QAM and 256QAM |
Receiver Sensitivity | 11b: -91dBm (1Mbps), -88dBm (5Mbps), -85dBm (11Mbps) 11a/g: -89dBm(6Mbps), -80dBm(24Mbps),-76dBm(36Mbps), -71dBm(54Mbps 11n: -83dBm@MCS0, -65dBm@MCS7, -83dBm@MCS8, -65dBm@MCS15 11ac HT20: -83dBm (MCS0), -57dBm (MCS9) 11ac HT40: -79dBm (MCS0), -57dBm (MCS9) 11ac HT80: -76dBm (MCS0), -51dBm (MCS9) |
Maximum Transmit Power | 100mw |
Adjustable Power | 1dBm |
IP Rating | IP41 |
Ports | |
Service Port | 2 10/100/1000BASE-T Ethernet uplink ports (Both ports support PoE) 1 USB port |
Management Port | 1 console port |
Power | |
Power Supply | Local power supply (DC 48V) and PoE+ (802.3af/802.3at) Support dual PoE for power backup (Power adapters sold separately) |
Power Consumption | <25.4W |
WLAN | |
Maximum clients per AP | Up to 612 |
BSSID capacity | Up to 16 per radio/Up to 48 per AP |
SSID hiding | Support |
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | Support |
Remote Intelligent Perception Technology (RIPT) | Support |
X-speed | Support |
Intelligent load balancing based on the number of users or traffic | Support |
STA control | SSID/radio-based |
Bandwidth control | STA/SSID/AP-based speed control |
Preference for 5GHz (band select) | Support |
Wireless position tracking | Support |
Dynamic Frequency Selection(DFS) | Future Release Support |
Security | |
PSK, Web, and 802.1x authentication | Support |
Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
SMS authentication | Support |
PEAP authentication | Support |
Data frame filtering | Whitelist, static/dynamic blacklist |
User isolation | Support |
Rogue AP detection and countermeasure | Support |
Dynamic ACL assignment | Support |
RADIUS | Support |
Wireless Intrusion Detection System (WIDS) | Support |
Wireless Intrusion Prevention System (WIPS) | Support |
Bluetooth | iBeacon: Support |
Routing | |
IPv4 address | Static IP address or DHCP reservation |
IPv6 CAPWAP tunnel | Support |
ICMPv6 | Support |
IPv6 address | Manual or automatic configuration |
Multicast | Multicast to unicast conversion |
Management and Maintenance | |
Network management | SNMP v1/v2C/v3, Telnet, TFTP, Web management |
One-click Optimization | Support (need to integrate with WIS) |
Fault detection and alarm | Support |
Cloud AC management | Support |
Statistics and logs | Support |
FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
External Characteristics | |
Lock | Support |
LED Indicators | 1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode) |
Specifications | |
Dimensions (W x D x H) | 230 × 230 × 42 mm (Height of AP only, excluding case and mount kit) |
Weight | 1.3kg |