| Model | RG-AP130(L) |
| Radio | Concurrent dual-band dual-radio |
| Protocol | 802.11a/b/g/n/ac |
| Antenna | Built-in omnidirectional antenna (Base gain 3.5dBi) 2×2 MIMO |
| Spatial Streams | 2 |
| Max Throughput | 300Mbps@2.4GHz 867Mbps@5GHz 1.167Gbps per AP |
| Maximum Transmit Power | ≤100mW (20dBm, transmit power of the RF card only) |
| Service Ports | Front: 4 10/100M Ethernet ports Side: 1 RJ-45 Voice/PoE pass-through port (RJ-11 combo) Rear: 1 10/100/1000M uplink port; 1 RJ-45 Voice/PoE pass-through port (RJ-11 combo) |
| Management Port | 1 console port (Micro USB) |
| Lock | Standard: Anti-theft screws and ordinary screws Optional: Lock and key |
| Color Plate Cover Options | White, black, silver and gold |
| LED Indicator | 1 LED status indicator (hidden) (configurable to switch off) |
| IP Rating | IP41 |
| WLAN | |
| Maximum clients per AP | Up to 32 |
| BSSID Capacity | Up to 8 per radio Up to 16 per AP |
| SSID hiding | Support |
| Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| Intelligent identification of smart device | Support |
| Intelligent load balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Preference for 5 GHz (band select) | Support |
| 802.11w | Support |
| Dynamic Frequency Selection (DFS) | Support |
| Security | |
| PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits) |
| QR code authentication | Support |
| SMS authentication | Support |
| PEAP authentication | Support |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Network Foundation Protection Policy (NFPP) | Support |
| Wireless Intrusion Detection System (WIDS) | Support |
| Wireless Intrusion Prevention System (WIPS) | Support |
| Remote probe | Future release support |
| L2 Features | |
| IGMP snooping | Support |
| VLAN features | Support |
| Routing | |
| IPv4 address | Static IP address or DHCP reservation |
| IPv6 transparent transmission | Support |
| Multicast | Multicast to unicast conversion |
| Location-based Service | |
| Wireless position tracking | Support |
| Management and Maintenance | |
| Network management | SNMP v1/v2C/v3, Telnet, TFTP, FTP and Web management |
| Visualized wireless heat map analysis | Support |
| Real-time spectrum analysis | Support |
| Fault detection and alarm | Support |
| Statistics and logs | Support |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| Dimensions (W x D x H) | 116 × 86 × 42 mm |
| Weight | 0.23kg |
| Installation Mode | Standard 86-type faceplate installation |
| Power Supply | PoE (802.3af) |
| Power Consumption | <8W |
Mua online ưu đãi hơn
Khuyến mãi HOT
Giờ vàng giá sốc
0899.199.598
Góc công nghệ
Khuyến mãi cực sốc






